DIRECTIONS FOR USE:

It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. This product is designed to dissolve quickly and completely providing a steady source of available chlorine to control the growth of algae, kill bacteria, and destroy organic contaminants.



READ THE PRECAUTIONARY STATEMENTS BEFORE USE:



METHOD OF APPLICATION: Broadcast the product evenly over a wide area in the deepest part of the spa with water circulating.

SPA AND HOT TUB USE:

1. Each level teaspoon (0.17 oz.) of this product will provide approximately 1.4 ppm available chlorine in 500 gallons of water.
2. Using an appropriate test kit, test and adjust the water to the following values: pH 7.2-7.8, total alkalinity 60-100 ppm, calcium hardness 200 ppm minimum.
3. Maintain these conditions for proper spa and hot tub operation by frequent testing with a test kit.
4. Do not allow cyanuric acid level to exceed 150 ppm.
5. It is recommended that spas and hot tubs be drained every 30-90 days. More often under heavy use.
6. Consult manufacturer’s recommendations concerning the compatibility of chlorine sanitizers with their equipment.
7. Some oils, lotions, fragrances and cleaners may cause foaming or cloudy water and may react with chlorine sanitizers to reduce their efficacy.

START-UP (FRESHLY FILLED)

1. Turn on the circulation system and ensure that it is operating properly.
2. Add 6 tsp. of this product for each 500 gallons of water.
3. Check the free available chlorine (FAC) and, if below 4-5 ppm, repeat as needed.
4. Re-entry into treated spas is prohibited above levels of 3 ppm of chlorine.

REGULAR USE:

1. Turn on the circulation system and ensure that it is operating properly.
2. Scatter approximately 3 teaspoons per 500 gallons of this product over the surface of water.
3. Always use a clean dry spoon.
4. Test for FAC and add additional product, if necessary, to attain 4-5 ppm FAC.
5. Maintain 1-3 ppm FAC while the spa or hot tub is in use.
6. After each use, shock treat with 9 teaspoons per 500 gallons water to control odors and algae.
7. Repeat as needed. Re-entry into treated spas is prohibited above levels of 3 ppm of chlorine.

Can I use AquaDoc Chlorine Granules in both hot tubs and spas?

Yes, AquaDoc Chlorine Granules are designed for use in both hot tubs and spas. They effectively treat any buildup and are versatile for different types of water systems.

How often should I add AquaDoc Chlorine Granules to my hot tub or spa?

The frequency of adding AquaDoc Chlorine Granules depends on usage and water conditions. Typically, you should add granules regularly to maintain the recommended chlorine levels. Frequent testing and adjustment ensure consistently clean and clear water.

Are AquaDoc Chlorine Granules safe for my hot tub or spa equipment and plumbing?

Yes, AquaDoc Chlorine Granules are formulated to be safe for hot tub and spa equipment and plumbing when used as directed. Following the recommended dosage and application guidelines will help prevent any harm to your equipment and maintain its longevity.